FREE shipping on all Australian orders over $100

Home · Jimny ·Side Window Upgrade Kit

Side Window Upgrade Kit
Left or right hand fitment for the Suzuki Jimny

The URNIETA Side Window Upgrade Kit is the expansion layer for the Jimny JB74 and JC74. It builds on the Salado Side Window Storage Kit and the 1970 Gullwing Window, adding storage, controlled venting, outside access, and a magnetic mosquito screen for camp ventilation.

Material ABS / Nylon / Stainless Iron
Finish Black
Weight 1.8kg
Compat. 02JB74 / JC74
Fits the Jimny.
01
Design Notes

The window upgrade your Jimny deserves.

The Jimny's compact body and off-road pedigree deserve accessories that are engineered to the same standard. Urnieta's Side Window Upgrade Kit is designed to fit cleanly into the existing aperture, giving you a cleaner result than aftermarket workarounds.

Available as a dedicated left-hand or right-hand kit, you select exactly the side you need, keeping the process straightforward and avoiding unnecessary hardware. Order one or both sides depending on your build.

02

Designed to fit first time.

Urnieta has engineered this kit specifically for the Jimny, so the geometry, mounting points and finish align with the factory body without.
Feature01

SIDE-SPECIFIC FIT

Offered in separate LH and RH variants so each kit is purpose-made for its respective door or panel position, ensuring accurate alignment every time.

Feature02

DIRECT REPLACEMENT

Engineered to suit the Jimny's existing window aperture, allowing a clean installation without cutting, fabricating or forcing hardware into place.

Feature03

URNIETA QUALITY

Produced by Urnieta, a specialist in vehicle glazing and window accessories, bringing focused engineering to a niche but important part of any Jimny build.

03

Vehicle fitment.

This kit is available in two fitment options to cover either side of the Jimny. Select the correct variant before adding to cart.
LH / RH
01 LH Left Hand Side Window Upgrade Kit Jimny Direct Fit
02 RH Right Hand Side Window Upgrade Kit Jimny Direct Fit
04

Installation overview.

Installation follows a straightforward process. Confirm your fitment side before beginning, and have basic hand tools ready.
Basic hand tools required. Select LH or RH variant to match the intended side of the vehicle.
01

SELECT YOUR SIDE

Confirm whether you need the left-hand or right-hand kit before ordering. LH and RH kits are not interchangeable.

02

PREPARE THE APERTURE

Remove any existing hardware or trim around the window opening as required, following the Jimny's standard disassembly procedure for that panel.

03

FIT THE UPGRADE KIT

Align the kit to the existing aperture and secure according to the included instructions, ensuring all mounting points are fully seated before finalising.

04

CHECK AND FINISH

Inspect the fit, confirm smooth operation if applicable, and refit any surrounding trim to complete the installation.

Next step

Spec it
your way.

Not sure which setup suits your build? Get fitment advice, install guides, or talk to the PVS team before you buy. We are Sydney based and here to help.