FREE shipping on all Australian orders over $100
Home · Baja Designs · S1 Flush Mount Auxiliary Light Pod
S1 White Flush Mount Auxiliary Light Pod - Universal
s1-white-flush-mount-auxiliary-light-pod-universal cardS1 White Flush Mount Auxiliary Light Pod - UniversalS1 White Flush Mount Auxiliary Light Pod - UniversalS1 White Flush Mount Auxiliary Light Pod - UniversalS1 White Flush Mount Auxiliary Light Pod - Universal
PVS Automotive

S1 Flush Mount Auxiliary Light Pod White LED, universal fit

The Baja Designs S1 packs serious off-road lighting performance into a compact 2.1-inch cube, flush-mounting cleanly into any panel with nothing more than a 2.5-inch hole saw.

New
$159 AUDSale
Was

or 4 interest-free payments of $39.75 with Shop Pay & Afterpay

Free Delivery, Australia-wide.Dispatched from our Sydney warehouse.12-Month Australian Warranty and 30-day returns.Backed by PVS Automotive, Sydney based support. Tax Deductible for Business. GST claimable if you are registered.Often fully deductible as a business expense. Check with your accountant. Australian Owned CertifiedAustralian Owned and Operated.Australian Owned Certified · AO 08314
Key Specs
Type LED Auxiliary Light Pod
Housing Size 2.1 in. length x 2.1 in. width x 2.1 in. height
Colour Temperature 5000K Daylight
Mount Style Flush mount, 2.5 in. hole saw cut-out
12-month Australian warranty
Flush Mount Install needs just a 2.5 inch hole saw
Waterproof and Submersible MoistureBlock sealed against the elements
30-Day easy returns
01
Design Notes

Big light output, small package.

The S1 was designed from the ground up to outperform lights far larger than itself. A highly specialised reflector and LED combination work together to push more usable light onto the road or worksite than you would ever expect from a 2.1-inch pod.

What sets the S1 Flush Mount apart from conventional pods is the installation method. A single 2.5-inch hole saw is all that is needed to create a clean, flush opening, giving your build a factory-finished look without complicated brackets or backing plates.

Available in Spot, Wide Cornering and Work/Scene patterns, the S1 adapts to whatever task you throw at it, whether that is carving up a dark two-track or flooding a campsite with comfortable, fatigue-reducing daylight-balanced light.

02

Built to Baja Designs standards.

Every S1 carries the full suite of Baja Designs technology and backing that their professional racing heritage demands.
Feature01

COPPERDRVE EFFICIENCY

CopperDrive technology runs every LED at 100 percent output, extracting maximum brightness and consistency from each diode without compromise.

Feature02

5000K DAYLIGHT OUTPUT

The 5000K colour temperature closely matches natural daylight, reducing driver fatigue on long night runs and rendering the trail in true, accurate colour.

Feature03

MOISTUREBLOCK SEALING

Fully waterproof, rain-proof and submersible construction keeps moisture out of the optics and electronics in the harshest conditions.

03

Installation overview.

The S1 Flush Mount is engineered for a straightforward DIY installation. Follow these steps for a clean, professional result.
Basic tools required. No special brackets needed.
01

CHOOSE YOUR LOCATION

Select a flat or gently curved panel location that provides sufficient clearance behind the surface for the S1 body and wiring.

02

CUT THE HOLE

Use a 2.5-inch hole saw to cut a single clean aperture at your marked location. Deburr and clean up any sharp edges.

03

FIT THE S1

Insert the S1 pod into the hole and secure it according to the included hardware. The flush design sits neatly within the panel surface.

04

WIRE AND TEST

Connect the harness to a suitable power source, verify polarity and test the light before finalising any cable routing or trim reinstatement.