S1 Black Flush Mount Auxiliary Light Pod Big light output. Tiny 2.1-inch footprint.
The Baja Designs S1 Flush Mount packs serious off-road lighting performance into a compact 2.1-inch cube, fitting anywhere you need light and installing through a single 2.5-inch hole-saw cut.
or 4 interest-free payments of $67.25 with Shop Pay & Afterpay
Australian Owned and Operated.Australian Owned Certified · AO 08314
Big light in a small package.
Baja Designs engineered the S1 from the ground up around a highly specialised reflector and LED combination. The result is a compact pod that outshines much larger auxiliary lights, whether you are navigating remote tracks at night or setting up camp in the dark.
At just 2.1 inches in every dimension the S1 slips into spots other lights simply cannot reach. The flush-mount design keeps your build clean and snag-free, and because the mounting hole is made with a standard 2.5-inch hole saw, installation takes minutes rather than hours.
Choose from Spot for long-distance driving illumination, Wide Cornering for expanded side coverage on winding trails, or Work/Scene to flood a worksite or campsite with usable light. All three share the same 5000K daylight colour temperature, reducing driver fatigue and rendering colours naturally.
Built on Baja Designs technology.
MOISTUREBLOCK
Fully waterproof, rain-proof and submersible construction keeps the S1 running reliably no matter the conditions on or off the track.
COPPERDRIVE
The LED is driven at 100 percent capacity at all times, extracting maximum output and consistency from every light.
CLEARVIEW OPTICS
The specialised reflector and LED pairing delivers all the light precisely where you need it, with minimal wasted scatter.
Installation overview.
CHOOSE YOUR LOCATION
Select a flat or near-flat mounting surface on your vehicle, bumper, roof rack or panel where the light will have a clear field of view.
CUT THE HOLE
Use a standard 2.5-inch hole saw to cut a single clean aperture at your chosen location. No custom brackets or multi-hole drilling required.
FIT AND WIRE
Push the S1 pod through the hole, secure it in place and connect the wiring to your preferred switch or harness. The flush-mount design sits tight and clean against the surface.