IROAD FX2-PRO-1 Dash Camera Full HD single channel system
The IROAD FX2-PRO-1 is a compact front-facing dash cam built around a Sony STARVIS sensor, delivering 1080p Full HD footage with GPS, Wi-Fi and ADAS warnings. A clean, capable single-channel solution for 12V and 24V vehicles when a rear camera simply isn't needed.
or 4 interest-free payments of $114.75 with Shop Pay & Afterpay
Item code: IRD-FX2-PRO-1 64
Australian Owned and Operated.Australian Owned Certified · AO 08314
One camera, no compromise.
Not every build needs a rear camera. The FX2-PRO-1 is designed for drivers who want solid, reliable front coverage without the extra wiring or cost. Sony STARVIS low-light performance, real HDR and a 140° wide angle mean you're capturing usable footage in the conditions that matter most, dawn runs, glare-heavy highways and dimly lit car parks alike.
Built-in GPS logs your speed and location alongside every recording, while the external 2.4 GHz Wi-Fi dongle lets you pull footage and adjust settings straight from your phone. ADAS lane departure and forward collision alerts add a layer of active awareness on long drives. Available in 64 GB, 128 GB or 256 GB storage configurations so you can match capacity to how far you travel between offloads.
What it does well.
SONY STARVIS SENSOR
The IMX307 sensor is built for low-light performance, pulling in more detail at dusk, dawn and in dimly lit urban environments compared with standard CMOS sensors.
REAL HDR
Hardware HDR processing balances bright and dark areas in a single frame, keeping licence plates and road signs readable when shooting into the sun or out of a tunnel.
BUILT-IN GPS
Speed and location data are embedded directly into every recorded file, giving you a verifiable record of where you were and how fast you were travelling.
WI-FI AND APP CONTROL
The external 2.4 GHz Wi-Fi dongle connects the camera to the IROAD app on your phone, so you can review footage, adjust settings and check the live view without removing the microSD card.
ADAS DRIVER ALERTS
Lane departure warning and forward vehicle departure alerts use the camera and GPS data to add a layer of active awareness on longer drives, prompting you when you drift or when traffic ahead pulls away.
TIME-LAPSE PARKING MODE
When the engine is off the FX2-PRO-1 can switch to a low-power time-lapse parking mode, recording at a reduced frame rate to keep an eye on the car over long periods while drawing far less power from the battery.
What’s in the box.
Installation overview.
MOUNT THE CAMERA
Clean the windscreen with the supplied wipe, peel the 3M tape backing and press the mount firmly into position behind the rear-view mirror for an unobstructed view.
INSERT THE MICROSD CARD
Slot the included microSD card into the camera before powering on. Format the card in-camera on first use to ensure compatibility.
ROUTE THE POWER CABLE
Run the uninterrupted fuse cable from the camera down the A-pillar trim and across to the fuse box. The fuse tap connects to a switched or permanent circuit depending on whether you need parking mode.
CONNECT WI-FI DONGLE
Plug the external Wi-Fi dongle into the camera's USB port, then pair with the IROAD app on your phone to complete setup and verify the GPS lock.